| |
| |
| |
| |
| |
|
Creating Excellence in Rubber Moulded & Extruded Products |
home |
contact |
|
        |
|
|
|
|
|
|
| |
Rubber Moulded
Products
|
Click for Extruded Products >> |
|
|
|
|
Customised Products
|
|
|
|
|
Polyurethane
Wheels, Rods, Sheets & Moulded Products
|
PTFE (TEFLON) Rods,
Sheets, Gaskets & Bellows |
|
|
|
Nylon & Polyacetal (
Delrin ) Products |
Rubber
Rollers & Coated Belts ( Timing Belts) |
Pipe
Clamps ( Tube Clamps ) Din Standard | |
|
|
Hydraulic Fittings ( Tube
Fittings) |
Hose Fittings, Industrial
Valves & Flanges | |
|
|
|
 |
Nylon 6 |
| |
|
|
|
Nylon 6 also known as Polyamide, is
characterized by a combination of high strength,
toughness and abrasion resistance and is ranked
as an Engineering Plastic. This is because of
its unique balance of mechanical, thermal,
frictional and chemical properties. Nylon
behaves in a predictable, reproducible manner
under load and in known environments. Engineers
and designers are looking to nylon as a
substitute for design material such as phosphor
bronze, gunmetal, cast iron, copper, aluminium
and the entire family of steels. |
|
Nylon is well accepted for several engineering
applications. It is tough and hard, with good
mechanical properties, high resistance to
abrasion and impact and low friction properties. |
|
|
| |
|
 |
Extruded Rods: 3mm to 9"
diameter in standard lengths of 300mm, 1000mm, 4 ft.,
bigger cut to size & roll lengths.
|
|
|
|
|
|
Extruded Square Rods: 3/4" to 3"
square (across flat) in standard 300mm, 1000mm, 4 ft.,
and non-standard lengths.
|
|
|
Extruded Sheets & Flat Strips: 0.2mm to 70mm
thickness in width 300mm to 1000mm in roll length & ct
to length up to
|
|
|
3000mm |
|
|
|
`````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````` |
|
|
Polyacetal (Polyoxymethylene
- POM) |
| |
|
|
|
Polyacetal (Polyoxymethylene - POM) is a widely
used crystalline engineering thermoplastic
popularly known as DelrinŽ which is a
homopolymer Polyacetal which exhibits slightly
different characteristics in copolymer grades.
Polyacetal is characterized as having an
excellent combination of physical properties
that makes it suitable for numerous industrial
applications. |
|
Polyacetal can be used in applications such as;
Gears, Bushings, Bearings, Rollers, Timing
Screws, manifolds, Valves and Valve Bodies,
Washers, Wear Pads, and many industrial machine
parts. |
|
|
| |
|
Polyacetal has the following
characteristics: |
|
|
Outstanding wear
resistance |
|
Low
coefficient of friction |
|
|
Outstanding chemical
resistance |
|
Excellent
mechanical properties (i.e. strength & stiffness) |
|
|
|
|
Good
temperature resistance |
|
Polyacetal is used in many static & dynamic industrial
applications replacing materials like; steel brass,
bronze, copper and aluminium. Polyacetal have improved
part life because of; better wear, more chemical and
corrosion resistance. These materials reduce factory
noise and will reduce or eliminate the need for
lubricants. |
|
|
Polyacetal
Rods:
1/4" to 8" diameter in
standard lengths of 300mm, up to 5 ft. |
|
|
Polyacetal
Sheets & Flat Strips: 6mm to 80mm in standard
widths up to 300mm, 600mm, 1000mm in lengths of
1000mm, 4 ft., |
|
2000mm. |
|
Polyacetal
Square Rods: 3/4" to 3" square (across
flat) in 300mm, 1000mm & 4 ft. lengths. |
|
<<back |
|
|
````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````` |
|
|
|
Offset
Printing Rolls, Flexo Printing Rolls Roto Gravure
Printing Rolls Ultra Violet Printing Rolls |
|
Silicon
Rubber Photo Copier Rolls |
| |
|
|
|
Range : Available in
various |
| sizes |
|
|
Hardness : 20
0 - 50
0 Shore A |
|
|
|
|
|
|
|
Range : Available in
various |
| sizes |
|
|
Hardness : 20
0 - 50
0 Shore A |
|
|
|
|
|
|
``````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````` |
|
|
Paper
Feed Rolls, X-Ray Machine Rolls Photographic Rolls |
|
Sponge
Rubber Coated Flat and Timing Belts |
| |
|
|
|
|
|
Range : Available in various |
| sizes |
|
|
Hardness : 10
0 - 60
0Shore A |
|
|
|
|
|
|
Range : Available in
various |
| sizes |
|
|
Hardness : 30 0 Shore A |
|
|
|
``````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````` |
|
|
'V' &
'U' Grooved Rubber Belts |
|
Rubber
Coated (Linatex) on P.U. & Rubber Timing Belts |
| |
|
|
|
|
|
Range : Available in various |
| sizes |
|
|
Hardness : 30
0 - 60
0 Shore A |
|
|
|
|
|
|
Range : Available in
various |
| sizes |
|
|
Hardness : 30
0 - 50
0
Shore A |
|
|
|
``````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````````` |
|
|
Rubber Feeder Belts, Sponge Rubber, Sandwich Belts, Rough
Top Surface 'V' Belts |
|
|
|
|
Range : Available in various |
| sizes |
|
|
Hardness : 30
0 - 60
0 Shore A |
|
|
|
|
|
|
|
|
 |
 |
|
|
Home |
Company Profile
|
O - Rings
|
Oil Seals
|
Bonded Seals (Dowty)
|
Hydraulic
Pneumatic Seals
|
Expansion
Bellows | Gaskets
|
|
|
|
Hose Pipes
|
Rubber Sheet
|
Diaphragms |
Rubber Extruded
|
Customised Products |
Tubings
|
Cord | Quality Policy |
Industries Served
|
|
|
| Infrastructure |
Enquiry
|
Contact Us
| |
|
Add. :
101, Gautam Prabhu, Haridas
Nagar, Shimpoli Road, Borivali (W),
Mumbai - 400092. INDIA |
|
Tel.:
(Off) +91-22-28982752
Cell :
09820035973
|
|
Email :
sales@creativerubbers.com
/
paragnparekh@hotmail.com
/
export@creativerubbers.com
/
enquiry@creativerubbers.com |
|
Site Design & Promoted by :
website.sahavas.com
(09223902680) Email :
quicksupport@sahavas.com |
|
